AOAC OMB Final Action Recommendation (December 2019)-2016.14
2016.14 (October 2019) – FOS-03 MANUSCRIPT
FOR ERP USE ONLY DO NOT DISTRIBUTE
Table 8. Summary of analytical conditions and modifications used by laboratories 1 Lab code Option Carrez HPAE Column Post-column addition Comment
1 2 3 4
No
PA1
0.13 mL/min Little positive pressure applied on top of the SPE column.
Example of chromatograms under Figure 1 .
Yes Yes
PA20
No
PA1
0.13 mL/min
No
PA1 a
0.52 mL/min Little positive pressure applied on top of the SPE column; Flow 1.0 mL/min; Injection volume 25 µL; Calibration done by Height. Example of chromatograms Figure 2 .
5 6
Participant dropped out
Elution program described in Table 9 ; Column temperature 20 °C; Injection volume 10 µL. Example of chromatograms Figure 3 . Flow gradient described in Table 10 ; Column temperature 30 °C; Injection volume 20 µL; Detector mode flexIPAD at 35 °C; Waveform described in Table 11 . Example of chromatograms Figure 4 . The sample was loaded on the SPE column with a small pressure on top; Elution program described in Table 12 ; Column temperature 30 °C. Example of chromatograms Figure 5.
No
PA10 a
No
7
No
Metrosep Carb 2 b
No
8
No
PA1 a
No
9
No
PA1 a
0.6 mL/min Applied some vacuum during SPE. Flow 1.0 mL/ml; Injection volume 25 µL.
10 11 12
Participant dropped out
Example of chromatograms Figure 6.
Yes Yes
PA1
No No
PA1 a
SPE performed under some vacuum; Elution program described in Table 13 ; Column temperature 30 °C; Injection volume 25 µL. Example of chromatograms Figure 7.
13 14
No No
PA20
0.2 mL/min
PA1 0.13 mL/min Used pump assist for SPE (day 1 only). Injection volume 25 µL. a Analytical column dimension (4 x 250 mm, 10 µm); guard column dimension (4 x 50 mm, 10 µm). 2 b Analytical column dimension (4 x 250 mm, 5 µm); guard column dimension (5 x 4 mm, 5 µm).
3 4
38
Made with FlippingBook HTML5