AOAC SPIFAN WPC ERP-Final Action Review (Nov. 2017)
2016.15 (Nov. 2017) - WPC-31 MLT-Final Action Review
FOR ERP USE ONLY DO NOT DISTRIBUTE
Note: the manual integration should include all peaks after the start of manual integration until the end of the run, as long as peaks are detected.
3. Data calculation 3.1. .Edit the custom report to have a table containing only migration time and area 3.2. Choose the custom report from the report menu 3.3. Copy the table to an Excel sheet 3.4. Move the data from the internal standard out of the table (in red below) 3.5. Separately sum the lower molecular weight whey proteins, the caseins and the higher molecular weight whey proteins (if multiple peaks are detected):
12.3 38938
M igration Tim e
A rea 6049 2777
0.010
0.010
12
PDA - 220nm SX3
PDA - 220nm Blank
12.5 12.6
Migration Time Area Percent
2435 13 13927
0.008
0.008
14.167 9.304
13.3 12843 13.6 10240 13.9 38437 14.2 53699 14.4 103273 Sum LM W W hey 243680
13.925 6.660
15.792 7.088
16.183 12.595
0.006
0.006
16.392 16.169
14.442 17.894
AU
AU
0.004
0.004
12.975 2.413
12.000 1.048
13.283 2.225
13.633 1.774
12.483 0.481 12.625 0.422
17.575 1.489
15.8 40909 16.2 72691 16.4 93315 17.6 8592 17.8 24258 Sum Casein 239765
17.750 4.203
22.417 5.470
20.108 4.017
0.002
0.002
12.275 6.747
0.000
0.000
12
14
18
20
22
24
26
16
20.1 23181 22.4 31567 Sum H M W W hey 54748
Minutes
Casein
LowMWwhey
High MWwhey
3.6. Calculate the whey protein content according to equations (1) and (2), taking into account the 1.4 correction factor for whey proteins.
Made with FlippingBook flipbook maker