SPDS 09052014
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
Qualitative assay
A method of analysis with two possible outcomes.
PDE5 Inhibitors
For the purposes of this SMPR: PDE5 inhibitors are defined as avanafil, lodenafil carbonate, mirodenafil, sildenafill, tadalafil, udenafil, or vardenafil; or any of their analogs. Refer to the Supplemental List of Known PDE5 Inhibitors (as of July 2014) at the AOAC website (address and
hyperlink to be inserted).
Selectivity Study
A study designed to demonstrate that a candidate method does not detect non-target compounds, and at the same time, demonstrate a candidate method’s ability to detect the different types of
PDE5 inhibitors (as a minimum the target panel provided in Annex II).
4. Method Performance Requirements : Table 1: Matrix Dependent Criteria
Target Test Concentration
Minimum Acceptable Results
Parameter
Parameter Requirements
Minimum of 33 replicates per matrix type, spiked at or below the designated low level target test concentration. Minimum of 5 replicates per matrix type spiked at 10x the designated low level target test concentration.
POD @ low concentration
100 ppm
90% POD §
POD @ high concentration
10 x low conc.
100% correct analyses are expected per matrix type ‡
Single Laboratory Validation POD @ zero concentration
Minimum of 5 replicates per matrix type.
0 ppm
low concentration
≥ 0.85 §
Use Appendix N: ISPAM Guidelines for Validation of Qualitative Binary Chemistry Methods.
LPOD
≥ 0.95 §
10 x low conc.
Multi -Laboratory Validation LPOD (0)
≤ 0.05 §
0 ppm
Note: LPOD and LPOD (0)
are not required for Single Laboratory Validations.
‡ 100% correct analyses are expected. Some aberrations may be acceptable if the aberrations are investigated, and acceptable explanations can be determined and communicated to method users. § 95% confidence interval
63 64 65 66 67 68 69
Made with FlippingBook